Alloy 22 Round Bar, Waterjet Cut Plate and Sheet for Synthethic Diamond Processing Tools

NeoNickel supplied alloy 22 in various sizes, thicknesses and forms to suit the tools maker’s requirements. It was crucial the right grade of alloy was used in this application due to the fact that each tube section held up to 10,000 carats of diamonds! You wouldn’t want these parts to corrode resulting in big holes that allow these diamonds to fall off!

Alloy 22 plates and alloy 22 sheets were water-jet cut to make several porous compartments. The water-jet cutting option was preferred so that the material would not contain cutting side effects from other cutting methods i.e. heat affected zone or uneven edges. The alloy 22 round bars were fabricated into other fittings and components of the tool including fasteners, lids and stems.

In the process of producing synthetic diamonds, molten salt bath and hydrofluoric acid are used to remove rocks and other contaminants from diamond surfaces. Molten salt bath (NaCl) and hydrofluoric acid (HF) are very corrosive media. Therefore alloy 22 was selected in this particular application.

Alloy 22 is a fully austenitic, nickel-chromium-molybdenum-tungsten alloy with excellent corrosion resistance. The high chromium content provides good resistance to oxidizing conditions while the molybdenum and tungsten give good resistance to reducing media. Moreover, alloy 22 provides exceptional resistance to pitting, crevice corrosion, general corrosion and stress corrosion cracking.

**Critical pitting temperatures (CPT) & Critical crevice temperatures (CCT)**

In oxidizing NaCl-HCl solution

4% NaCl + 0.1% Fe2(SO4)3 + 0.01M HCl

24 hour exposure test

**Pitting test in oxidizing acidic chloride environment**

11% H2SO4 + 1.2%HCl +1%FeCl3 + 1% CuCl2

**Alloy****Temperature °C**


**Temperature °C**


**Temperature °C**


**C22****150** **102** **120**
**C276****150** **50** **110**
**C4**140** **50** **90**
**625**90** **50** **75**
**G-30**70** **40**
**Al-6XN®**70** **45**
**254 SMo®**60** **40**
**Ferralium®**50** **35**
**904L****45** **20**
**317****35** **15**
Proud members of the British Valve & Actuator AssociationProud members of the British Valve & Actuator Association