Case Studies

A leading power company selected AL-6XN® alloy for twelve shipboard shell and tube heat exchangers. Used to vapourise liquefied natural […]

In 1989 AL-6XN® Alloy was selected to fabricate nine trays in the main atmospheric crude oil distillation tower of a […]

AL-6XN® was used to create two fractional-distillation columns measuring approximately 14ft in diameter and 60ft tall at a leading forest […]

Since 1985 AL-6XN® alloy has been used in a wide variety of operating conditions including offshore oil platforms, power plants […]

Case Study on Alloy 22 in a Coking Plant Application Sulphur Recovery Application Utilising Split Claus Technology Alloy 22 fittings […]

Bespoke Nutsche Pressure Filters are a key part of the manufacturing process in multipurpose pharmaceutical plants used in the Pharmaceutical […]

NeoNickel supplied alloy 22 in various sizes, thicknesses and forms to suit the tools maker’s requirements.  It was crucial the […]

Flue Gas Desulphurisation plants are designed to last the life expectancy of the coal fired power stations. A number of […]

The absorption tower and packed column consisted of various sections and components including vapour/liquid distillation & absorption, liquid/liquid extraction, catalytic […]

NeoNickel (formerly Corrosion Materials Limited) supplied a complete package of alloy C276 welded pipe, pipe fittings, flanges, weldolets and other […]

NeoNickel supplied elbows, pipes, flanges and fasteners (washers, nuts & bolts) in C276 to one of the world leading animal […]

The alloy RA 602 CA® was used to construct the Argon Oxygen Decarburization (AOD) Chute at a steel mill after […]

In 2001 RA 602 CA® was selected for a replacement Calciner following months of extensive coupon testing. During the process […]

Leading heat treating company Syracuse Heat Treating Corporation selected RA 602 CA® for use in the construction of two Trident […]

RA 602 CA® has been used to fabricate three-legged radiant tubes for use in one of Euclid Heat Treating Co’s […]

Originally alloy 600 was used during the aluminide coating operation of one gas turbine component supplier. Exposed to extreme temperatures […]

RA 602 CA® alloy serpentine alloy trays are used for copper brazing stainless steel heat exchangers. Measuring 36” x 48” […]

Providing spheroidized, normalizing and annealing services to the manufacturing industry, Ajax Metal Processing used the traditional cast HT alloy grid […]

The process of carburizing is one of the most effective heat-treating operations used to improve strength and wear resistance. The […]

Leading flare tip manufacturer Kaldair, recently turned to RA330 following an increasing number of failures among larger versions of its […]

Application A RA330® rectangular muffle was fabricated for the sintering stage of a powdered metal application. The muffle, specifically used […]

After years of development a cylindrical tube was created to aid perlite expansion. During this procedure the fabricated tube is […]

During the production of molecular hydrocarbon chains, hydrogen is removed from long chain molecules before the gas streams are heated […]

Reaching temperatures of 900-938°C the catalyst for fluidized bed catalytic cracker units is created by calcining Kaolin clay. Offering excellent […]

Prior to using RA330®, the Midwestern refinery had been using a refractory lined 310 stainless steel flare tip, and it […]

Introduction Recently there has been a dramatic rise in the use of brines in swimming pools. Possessing a disinfectant quality […]

The Thames Barrier in Greenwich, London, was originally constructed in the 1980s to prevent flooding of London at high tides. […]